• 30 ml PUR Dispense Head

  • Product code: 1464918
  • Material and equipment:
    Manufacturer:
  • This Loctite 30 ml PUR Dispense Head is designed for use with the Loctite 30 ml PUR Controller and Pre Heater. The system is used for dispensing Loctite PUR hotmelt adhesive products at manual or semi-automation workstations, such as in workshops, laboratories, industrial installations and production lines. It is a self-contained dispense system, that can also be integrated with Loctite Benchtop Robots.

    NOTE: One of the following Dispense Needles must be selected and purchased separately:

    18 Gauge 1/2 inch long; IDH 1483249
    19 Gauge 1/2 inch long; IDH 1500889
    20 Gauge 1/2 inch long; IDH 1483250
    21 Gauge 1/2 inch long; IDH 1483262
    23 Gauge 1/2 inch long; IDH 1483264
    25 Gauge 1/2 inch long; IDH 1483265

    Minimum flow rate is 1 mg/sec using a 25 gauge Dispense Needle while the maximum flow rate is 73 mg/sec using a 18 gauge Dispense Needle. These values are for reference only; this is not a specification. Flows were established dispensing Loctite adhesive 3542.

  • Price: Contact
  • Product Description Sheet Operating Manual 2D Dwg File 2D Dxf File 3D Stp File

Rating: 
 
 
 
 
 
 0point0turn
Sale quantity 0 chiếc

This Loctite 30 ml PUR Dispense Head is designed for use with the Loctite 30 ml PUR Controller and Pre Heater. The system is used for dispensing Loctite PUR hotmelt adhesive products at manual or semi-automation workstations, such as in workshops, laboratories, industrial installations and production lines. It is a self-contained dispense system, that can also be integrated with Loctite Benchtop Robots.
 
NOTE:  One of the following Dispense Needles must be selected and purchased separately:
 
18 Gauge 1/2 inch long; IDH 1483249
19 Gauge 1/2 inch long; IDH 1500889
20 Gauge 1/2 inch long; IDH 1483250
21 Gauge 1/2 inch long; IDH 1483262
23 Gauge 1/2 inch long; IDH 1483264
25 Gauge 1/2 inch long; IDH 1483265
 
Minimum flow rate is 1 mg/sec using a 25 gauge Dispense Needle while the maximum flow rate is 73 mg/sec using a 18 gauge Dispense Needle.  These values are for reference only; this is not a specification.  Flows were established dispensing Loctite adhesive 3542.

 
 

Category product


Cart

Support online

Engineering Department
Business Divisions
Mr Quan
+84963580011
Mr Hanh

Counter

  •   Online 3
 
  •   Today 2,435
  •   This month 73,880
  •   Total 3,930,441
  • Loctite®
  • Henkel
  • Fisnar
  • Humiseal
  • Dymax
  • Multicore
  • 3M
  • Abracon LLC
  • Adesto Technologies
  • Alliance Memory, Inc.
  • Alpha Wire
  • American Technical Ceramics
  • Amphenol
  • Ampleon
  • ams
  • Analog Devices, Inc
  • APEM
  • ASSMANN WSW Components
  • AVX
  • Bourns, Inc.
  • Broadcom Limited
  • B&F Fastener Supply
  • Cinch Connectivity Solutions
  • Citizen Finedevice Co., LTD
  • Coilcraft
  • Cornell Dubilier
  • CTS Components
  • Cypress Semiconductor
  • Delta
  • Diodes Inc.
  • Eaton
  • ECS International
  • EDAC
  • EPCOS
  • Epson
  • Everlight
  • Fox Electronics
  • Harwin
  • Hirose
  • Infineon
  • Intel
  • ISSI
  • Johanson
  • JST
  • KEMET
  • Lite-On
  • Littelfuse
  • MA-COM
  • Maxim Integrated
  • MCC
  • Mean Well
  • Microchip
  • Microsemi
  • Molex
  • Murata
  • Nexperia
  • NIC Components
  • Nichicon
  • ON Semiconductor
  • Orion
  • Panasonic
  • PEREGRINE SEMICONDUCTOR
  • Phoenix Contact
  • Pulse
  • Qorvo
  • Qualtek
  • Renesas
  • Rohm
  • Rubycon