• 30 ml PUR Controller

  • Mã sản phẩm: 1464916
  • Phân loại sản phẩm:
    Nhà sản xuất:
  • The Loctite 30 ml PUR Dispense System is designed to dispense dots or beads of Loctite PUR Hot Melt adhesive products packaged in 30 ml syringe barrels. The system consists of a Controller, Dispense Head and Pre Heater (each purchased separately). The controller is an electro-pneumatic device to precisely control the amount of air pressure applied to the syringe barrel for a set time period to deliver a consistent amount of adhesive each time the system is actuated. The Controller has two heating circuits that can be used to heat two Dispense heads at the same time or (1) Dispense Head and (1) Pre-Heater. The system is designed to be used with Loctite Benchtop Robots or can integrate into any stationary work cell.

    The Loctite SD15 Heat Controller and SD15 Tip Heater are accessories for this PUR Dispenser. The system keeps needle warm when the PUR dispenser is not being used which will enhance the first piece’s performance when going back to work.

    Product Features:

    Integrated dispense time control, pressure control, and temperature control features into one system.
    Digital control for dispense head amd pre heater temperature and dispense timer.
    Analog air pressure regulator for syringe pressure control. 0-100 psi (7 bar).
    Dispense sequence can be foot switch actuated or externally actuated via a PLC.
    Auto dispense mode for timed dispense control of beads or drops.
    Manual dispense mode for variable volume applications.
    PTFE safety shroud on dispense head.
    Reduced material change-over time when used with 30 ml PUR Pre Heater.

  • Giá bán: Liên hệ
  • Product Description Sheet Operating Manual 2D Dwg File 2D Dxf File 3D Stp File

    Spare Parts:

    Item Title
    97201 Footswitch
    985397 Airline Filter / Regulator w/ Pressure Gauge, 0-150 psi

     

Đánh giá của bạn: 
 
 
 
 
 
 0điểm /0lượt
Còn lại 0 chiếc

The Loctite 30 ml PUR Dispense System is designed to dispense dots or beads of Loctite PUR Hot Melt adhesive products packaged in 30 ml syringe barrels. The system consists of a Controller, Dispense Head and Pre Heater (each purchased separately). The controller is an electro-pneumatic device to precisely control the amount of air pressure applied to the syringe barrel for a set time period to deliver a consistent amount of adhesive each time the system is actuated. The Controller has two heating circuits that can be used to heat two Dispense heads at the same time or (1) Dispense Head and (1) Pre-Heater. The system is designed to be used with Loctite Benchtop Robots or can integrate into any stationary work cell.

The Loctite SD15 Heat Controller and SD15 Tip Heater are accessories for this PUR Dispenser.   The system keeps needle warm when the PUR dispenser is not being used which will enhance the first piece’s performance when going back to work.

Product Features:

Integrated dispense time control, pressure control, and temperature control features into one system. 
Digital control for dispense head amd pre heater temperature and dispense timer.
Analog air pressure regulator for syringe pressure control. 0-100 psi (7 bar).
Dispense sequence can be foot switch actuated or externally actuated via a PLC.
Auto dispense mode for timed dispense control of beads or drops.
Manual dispense mode for variable volume applications.
PTFE safety shroud on dispense head.
Reduced material change-over time when used with 30 ml PUR Pre Heater.

 
SD15 Tip Heater for 30 ml PUR Dispense System

SD15 Tip Heater for 30 ml PUR Dispense...

1667509

Giá bán: Liên hệ

SD15 Heat Controller for 30 ml PUR Dispense System

SD15 Heat Controller for 30 ml PUR...

1667508

Giá bán: Liên hệ

Dispense Needle - 19 Gauge 1/2 inch long for 30 ml PUR Dispense Head

Dispense Needle - 19 Gauge 1/2 inch long...

1500889

Giá bán: Liên hệ

Dispense Needle - 25 Gauge 1/2 inch long for 30 ml PUR Dispense Head

Dispense Needle - 25 Gauge 1/2 inch long...

1483265

Giá bán: Liên hệ

Dispense Needle - 23 Gauge 1/2 inch long for 30 ml PUR Dispense Head

Dispense Needle - 23 Gauge 1/2 inch long...

1483264

Giá bán: Liên hệ

Dispense Needle - 21 Gauge 1/2 inch long for 30 ml PUR Dispense Head

Dispense Needle - 21 Gauge 1/2 inch long...

1483262

Giá bán: Liên hệ

 

Danh mục sản phẩm


Các hàng đã đặt

Hỗ trợ trực tuyến

Phòng Kỹ thuật
Phòng kinh doanh
Mr Quân - Linh kiện điện tử
+84963580011
Mr Hanh
Mr Tùng - Máy in, mực in
0964510031

Sản phẩm nổi bật

Thống kê truy cập

  •   Đang truy cập 20
 
  •   Hôm nay 2,768
  •   Tháng hiện tại 13,337
  •   Tổng lượt truy cập 4,775,049